The Stages of Leather Production

From raw h hide to finished leather: 8 steps

Making a leather " hide " is a lengthy process consisting of many steps that require precision, experience, and a mastery of the material.

At Radermecker, every process has one goal: to preserve the natural qualities of the h hide e while enhancing the desired properties of the finished leather—whether that be firmness, suppleness, durability, stability, or texture.

From the preparation of the hide to the final inspections, production takes place at our tannery in Comines, Belgium.

1. Sorting hides 

When the raw hides arrive at the tannery, the “river work” has already been completed, and we receive them in the “wet white” or “wet blue” stage. 

Upon receipt, each hide is inspected to verify:

  • the possible presence of defects: scars, healed scratches, knots, or insect bites;
  • its thickness

The hides are then rigorously sorted and classified based on their thickness, size, and grain quality. 

This is also when we ensure their traceability; each hide is then marked with a code that allows us to identify its origin. 

2. Tanning 

Tanning is an essential step in transforming a prepared h hide into leather, using tannins derived from plants or minerals.

At the " Radermecker Tannery," we prioritize vegetable tanning for most of our leathers. This longer process uses extracts from quebracho, mimosa, and chestnut trees, among others, to give the leather its properties and character.

The hides are placed in vats drums for several days, where they soak in a mixture of water, vegetable tannins, and fats.

Before the products are released, our artisans conduct pH, penetration, temperature, and adhesion tests. They adjust the formula as needed and verify that the tanning agent has penetrated the entire thickness of the hide —this is what we call “through-tanned” leather. 

It is at this stage that the “ hide ” truly becomes leather.

Vegetable tanning, in particular, produces leathers with natural, deep hues that develop a beautiful patina over time.


3. Food

The tallow-bath treatment is a process specific to the Radermecker Tannery, which involves immersing the hides in a bath of hot fat at temperatures between 70 and 80 °C.

During this step, the grease penetrates deep into the leather and is distributed evenly throughout its entire thickness, rather than remaining only on the surface.

This treatment makes it easier to cut and work with the leather while making it supple and water-resistant. 

The natural oils in leather also help preserve its properties over time and promote the development of a beautiful patina.

Oiled leathers are therefore particularly well-suited for heavy-duty use and outdoor environments, especially for equestrian equipment.

After the oil bath, the excess oil on the flower and the “ flesh ” is removed by “ drum.”

The hides then undergo the various stages of production— natural , or post- dye —before mechanical processing and drying.

Discover food preserved in lard →


4. dye 

The dyed leathers are dyed directly at drum.

For several hours, the hides are turned in a bath of dye so that the color gradually penetrates the leather.

The goal is to achieve an even color, both on the surface and throughout the thickness.

This method also preserves the natural nuances and unique characteristics of each hide.

Once the “ dye ” is complete, the skins are removed from the “ drum ” and dried before proceeding to the next stages of production.


5. Drying / Framing 

We use two drying methods in our tannery, depending on the thickness of the leather.

  • Hanging Drying : The thickest leathers, such as our Niagara, are hung in a ventilated room with warm air. The heat remains gentle and evenly distributed to dry the leather gradually and evenly.
  • Drying on a frame : Thinner leathers, such as our Angel, are placed on frames and then gently stretched. This step helps minimize wrinkles and ripples in the hide while ensuring gentle and even drying.

In both cases, the goal is to preserve the quality of the leather throughout the drying process.

6. Work on your skills 

After tanning, conditioning, and drying, various mechanical processes are used to adjust the leather's properties.

Depending on the specification, it can be wrung out, smoothed, softened, stretched, or processed to achieve a specific firmness, stability, or elasticity.

For certain types of leather intended for demanding applications, pre-stretching helps control their elongation during use.

The leather then begins to take on the characteristics that will determine its future use.

Learn about careers in mechanical engineering →

7. Finishing  

Finishing—which we also call "enrichment"—gives the leather its final look and feel.

It can be very natural or more heavily treated, depending on the desired result: a " aniline" finish, matte or glossy, grained, nubuck, more or less " soft," with more grip or a distinctive texture.

The goal is not merely aesthetic. A finish must be consistent with the leather’s expected performance and with the way it will age over time. 

Learn about leather finishes →

8. Testing and Inspection 

The manufacturing process concludes with a series of inspections.

The hides are compared to the standards established by the tannery to verify their color, texture, appearance, and technical properties.

Depending on the circumstances, various tests are also used to evaluate their durability and performance over time.

This final step ensures consistent production and allows Radermecker to continue refining its leathers based on concrete data.

Learn more about our quality control →

Discover our other blog posts

Leave a comment

This blog is moderated